Bnc PB-5 Bedienungsanleitung PDF herunterladen (Seite 18)

SECTION 4

SPECIFICATIONS

Rep Rate: 2.0 Hz to 500 kHz

Width: 100 ns to 1 ms, continuously variable

Delay: 250 ns to 10 ms

Rise Time: 0.05 µs to 10 µs (10%-90%) in 8 steps

Decay Time: 0.5 µs to 1.0 ms (100%-37%) in 11 steps

Amplitude: 0.0 to 10.0 V (0 to 5 V into 50 )

Scaleable in energy units (keV)

Resolution: 155 µV

Jitter: ± 10 ppm

Attenuation: 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000

Integral non-linearity: ± 15 ppm

Temperature stability: ± 5 ppm per °C from 20°C to 45°C

Pulse Type: Flat-top or tail pulse

In flat-top mode, both rise time and

decay time are adjustable. In tail mode, rise time is fixed

at 50 ns and decay time is adjustable.

Polarity: Positive/Negative

Ext. Trigger: 0 to 500 kHz, +100 mV to +10 V

Threshold is adjustable from +100 mV to +3.5 V in 0.1 V

steps.

Trigger Out: +5 V unterminated, +2.2 V into 50 , width 200 ns

Modes: Single pulse via a front panel pushbutton

Internal Rep Rate

External Trigger

External Gate with the same pulse requirements as Ext

Trig.

Internal Ramp-adjustable start and stop points: adjustable

ramp period 30-900 S, selectable number of ramp cycles,

ramp in keV or volts. Clamped baseline option to bring

the baseline to zero prior to the next pulse.

Stored Settings: Up to 9 complete configurations with recall. Also stores

parameters upon shutdown for recall when powered on.

Remote: RS232 at 9600 baud.

1 2 ... 13 14 15 16 17 18 19

Keine Kommentare

Bnc PB-5 Bedienungsanleitung Seite 18