Bnc 745-20C-T Bedienungsanleitung PDF herunterladen (Seite 18)

User's Manual - MOD745-20

October 2014

Page 18 / 30

6. REMOTE CONTROL

6.1. Connection

To connect over the LAN, follow these steps:

 Connect the instrument LAN connector to the remote control computer,

 On the user interface, either specify the LAN address,

 On the remote controlcomputer, enter the instrument’s IP address,

 After the connection has been established, the following commands can be used to modify the

settings:

o Set the instrument’s IP address with: IP XXX.XXX.XXX.XXX

o Query the instrument’s IP address with: IP?  :IP XXX.XXX.XXX.XXX

o Set the instrument’s IP mask with: NM XXX.XXX.XXX.XXX

o Query the instrument’s IP mask with: NM?  :NM XXX.XXX.XXX.XXX

o Set the instrument’s IP gateway: GW XXX.XXX.XXX.XXX

o Query the instrument’s IP gateway with: GW?  :GW XXX.XXX.XXX.XXX

6.2. Command structure

MOD745-20 is compatible with all command of the LIL timing system.

Each command description has at least some of the following items:

 Full command syntax

 Form Set / Query

 Brief description

 Parameters

 RST value

 Specified limits

 Example

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Keine Kommentare

Bnc 745-20C-T Bedienungsanleitung Seite 18