Bnc 7000 Series User Manual Bedienungsanleitung PDF herunterladen (Seite 45)

3.9 FFT Analyzer Measurement

This tab is used to measure noise on one or two channels of the FFT analyzer. Select the frequency

range and the number of averages. Under “More” select either “Single Channel” or “Two channel

cross-correlated” measurement. Press start button to run measurement.

Figure 19 FFT Analyzer Mode

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 53 54

Keine Kommentare

Bnc 7000 Series User Manual Bedienungsanleitung Seite 45