Bnc 6040 Bedienungsanleitung PDF herunterladen (Seite 10)

SPECIFICATIONS

Input Characteristics

TRIG IN External trigger to initiate delay and width sequences.

Range: 0-100 MHz.

Input Impedance: 50 ohms.

Slope: Selectable pos/neg.

Minimum Pulse Width: 3 ns.

Minimum Signal Amplitude: 100 mV.

Maximum Signal Amplitude: ± 7 V.

Threshold Range: ± 2.5 V.

Threshold Resolution: 10 mV.

Trigger Jitter: 20 ps rms (between TRIG IN and TRIG OUT).

MODULE DISABLE Allows the outputs on some modules to be remotely

disabled.

Disable: 4 V - 5 V. 5 mA sourcing current (into the 6040) or

contact opening.

Enable: 0 - 300 mV, 5 mA sinking current (from the 6040)

contact closure, or plug removed from jack.

Output Characteristics

PULSE OUT Provides the signal selected by the rep rate,

delay, width, and single/ double pulse settings.

Corresponds in timing to ECL OUT and to module outputs.

Amplitude: +5 V into 50 ohms.

Transition Times: 1 ns rise time, 1.5 fall time.

Insertion Delay: 50 ns typical (between TRIG IN and PULSE OUT;

see Figure 1-1).

ECL OUT Provides an ECL version of PULSE OUT.

Amplitude: -0.8 V to -1.8 V into 50 ohms ("low true" pulses).

Transition Times: 700 ps.

Insertion Delay: 50 ns typical (between TRIG IN and ECL OUT; see

Figure 1-1).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 64 65

Keine Kommentare

Bnc 6040 Bedienungsanleitung Seite 10